Thermalright AXP-140 RT_AM2 Instrukcja Użytkownika Pobierz pdf

Step 1: Step 4:

Step 7:

Step 2: Step 3:

Step 1：Remove the 775 retention Step 2：Pull out the pins away from the spring

loaded screws.

Step 3：Use the wrench to tighten the same screws on the AM2 scissor

mount. Be sure to tighten all the way down. To check for sturdiness,

press down on the screws to see if they still have room to spring.

Step 5：Retract the scissor mount to smallest form

and insert between the heatpipes. Expand back to

original form to settle on top of heatsink base.

Step 5:

Step 5：Insert the pins through the holes found

near the top of the screws to secure in position.

Make sure to keep the pin leveled at both ends.

Step 7：Place heatsink on top of CPU with the screws

protruding on the backside of the motherboard. Attach the

backplate to the bottom of the socket. Secure the heatsink

in place by tightening the nuts on the screws using the

included wrench.

Step 8:

Step 8：Installation completed.

Step 6:

Step 6:Apply a thin and evenly spread out

layer of thermal paste to the CPU and to the

bottom of the heatsink base.

mechanism from the heatsink.

Use the included wrench to loosen the screws.

AXP-140 RT - AM2 / AM3

Step 1: Step 4:Step 7:Step 2: Step 3:Step 1：Remove the 775 retention Step 2：Pull out the pins away from the spring loaded screws.Step 3：Use the wrenc

Brak uwag

Thermalright AXP-140 RT_AM2 Instrukcja Użytkownika